Pulling/tugging lashes directly off of lids or eyelashes are NOT recommended for safe removal.

Shelf life ranges from 3- 6 months opened, depending on usage and proper storage.

Even though it is hypoallergenic, it relatively will not cause reaction to most allergies. It is not guaranteed to prevent irritation for every single allergy. Please perform a small patch test on yourself, wait 24-48 hours to see if skin irritates before applying to eyelid. Every person's body chemistry is different and we are not held responsible for any allergic reactions.

Clusters Directions 

1. Clean lashes and make sure they are free of product and oil 

2. Work in sections if necessary.

3. Apply 1 single thin layer of Gorilla Lash Glue (Brush on) to natural lashes from root to tip and wait until tacky (about 10- 15 seconds)

4. Apply false lash to natural lash only and not the waterline 

5. Repeat until desired look is achieved 

6. Pull down lashes and apply 1-2 layers of Wisp Takers Sealant 2.0 on top of lashes where false/natural lashes connect  

7. Wait about 30 seconds-1min for sealant to dry down 

8. clamp false and natural lashes together with tweezers TIGHTLY 1-2 times. 

9. Wait 4hrs + for pull test and 24-48hrs for water test for best results. 

Strips Directions 

1. 1. Clean eyelid and make sure they are free of product and oil.
2. 
   
3. 2. Apply 2-3 layers of Gorilla Lash Glue (Strip side) to eyelid and wait until tacky (about 10-15 seconds)
4. 
   
5. 3. Apply strip lash to the middle of eyelid close to lash line as safely possible 
6. 
   
7. 4. Repeat for both ends of strip
8. 
   
9. 5. Apply regular sealant to eyelid (optional)
10. 
    
11. 6. Press Strip lash into natural lash to blend. 
12. 
    
13. 7. Wait 24-48 hours before getting wet for best results